Galvanized Wall Ties Arlington VA

Do wall ties need to be galvanized in solid masonry walls in Arlington? The steel used in concrete is typically not coated. Wouldn't solid masonry offer protection similar to that offered by concrete?

Probuilt Deck And Fence
(301) 474-3550
5110 Roanoke Place, Suite 106
College Park, MD

Data Provided by:
The Engineering Groupe
(703) 670-0985
13580 Groupe Drive, Suite 200
Woodbridge, VA

Data Provided by:
Artitech Construction
(301) 519-6997
7809 Breezy Down Ter
Rockville, MD

Data Provided by:
Pepco Energy Services
(703) 253-1644
1300 N. 17th St., Ste. 1600
Arlington, VA
 
PEPCO
(202) 872-2000
701 Ninth St., NW
Washington, DC
 
Nahmias Home Improvements
(301) 919-1729
14005 Westview Forest Dr
Bowie, MD

Data Provided by:
Baileys Industries
(301) 916-5140
Po Box 4166615 S. Frederick Ave
Gaithersburg, MD

Data Provided by:
Bozzuto Construction
(703) 379-2402
4220 Campbell Ave
Arlington, VA
 
Sigal Construction Corporation
(703) 302-1500
2231 Crystal Dr.
Washington, DC
 
Perkins + Will
(202) 737-1020
2100 M St., NW
Washington, DC
 
Data Provided by:

Galvanized Wall Ties

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: October 1, 1998

Do wall ties need to be galvanized in solid masonry walls? The steel used in concrete is typically not coated. Wouldn't solid masonry offer protection similar to that offered by concrete?

There is a substantial difference between the protection to steel offered by masonry and that offered by concrete. In concrete, the fluid cement paste completely covers the bars. In masonry, the steel is often dry-laid on the units and the mortar placed on the top. Therefore, the bars are not always encased completely in mortar. Sometimes there are voids along the bottom of the bars, which can allow condensation and moisture to accumulate. The corrosion potential of the steel is also affected by material porosity and diffusion rates of harmful ions (such as chlorides). Bare steel is protected initially by a passivating layer that forms in the highly alkaline environment of wet concrete or mortar. Carbonation will reduce the alkalinity of the mortar or concrete and eliminate this protection. Mortars, being more porous than concrete, will carbonate at greater rates. There is also greater potential for diffusion from chloride ions from acid cleaning or other sources. Depending on their concentration, chloride ions will eliminate the pacifying effect of the mortar. For these reasons, unprotected steel encased in mortar will have an increased corrosion potential at a young age. Requirements for concrete or mortar cover...

Click here to read full article from Masonry Construction

Local Events

Archiving 2009
Dates: 5/5/2009 – 5/8/2020
Location:
Crystal City Hilton Arlington
View Details