Woodworking Tools and Equipment Salisbury MD

Deciding to enter into the world of woodworking is not that hard of a decision to make. It's the decisions required as to what equipment to buy in Salisbury that may be a bit more challenging. Not only do you have to decide on what tools to buy but also how much you want to budget for them as well as their quality.

The Home Depot
(410)548-9800
115 E North Pointe Dr
Salisbury, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Lowe's
(410) 546-6300
2606 N. Salisbury Blvd.
Salisbury, MD
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Fastenal- Salisbury
410-219-5101
620 Naylor Mill Rd Unit H Salisbury, MD, 21801
Salisbury, MD
 
Centre At Salisbury Mall
(410) 860-8600
2306 N Salisbury Blvd
Salisbury, MD
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:10-21
Sun:11-18
Store Features
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:10-21
Sun:11-18

Kmart 3237 / Cross Merch
(410) 749-1145
301 Tilgham Rd
Salisbury, MD
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

The Home Depot
(410)629-1465
11408 Ocean Gateway
Berlin, MD
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Mid Atlantic Fasteners- Salisbury
410-860-2000
2231 Northwood Drive Salisbury, MD, 21801
Salisbury, MD
 
LOWE'S OF SALISBURY, MD.
410 546-6300
2606 NORTH SALISBURY BLVD. SALISBURY, MD, 21801
Salisbury, MD
 
Rommel's Ace Home Center
(410) 742-2127
121 W College Ave
Salisbury, MD
 
Harris Ace Hardware
(410) 651-0422
11718 Somerset Ave
Princess Anne, MD
 

Woodworking Tools and Equipment

Provided By:

Author: Ryan Henderson

Deciding to enter into the world of woodworking is not that hard of a decision to make. It's the decisions required as to what equipment to buy that may be a bit more challenging. Not only do you have to decide on what tools to buy but also how much you want to budget for them as well as their quality.

Some tool shoppers feel they just have to buy the highest quality tool on the market while feel they really want to keep it low budget. If you are a weekend woodworker than the low budget, tools should work just fine for you. If you are a seasoned woodworker starting to set up your own shop and know you are, going to be at it consistently then you may want the higher priced tools which means better quality.

Number one on your list should be a drill and a corded one is less expensive. Be sure it has a screwdriver attachment. Next, you want to get a circular saw for your trimming and basic cuts... Then you will need a sander. Preferably a finishing sander. It's perfect for rounding off some of your pieces and it gives a nice finish to your projects. It only uses a ¼ of a piece of sandpaper, which is quite economical

A jigsaw is another valuable tool. It's used for your rough outline work and for cutting curves. It's not a tool that you will want to be without. Then a table saw should be on your "must buy" list as well. When you go to buy this one spend a bit more money and get a good quality one. You will be using this tool on a regular basis. You need one that is going to have a powerful motor. The lesser quality ones with the smaller motors tend to stall out.

The same principal should apply for your router so make sure you buy a good one. You want to be sure you are going to get precision work. The router has multiple uses like cutting the profiles into the wood and is also used to cut molding and special cuts as well. You will need to determine if you want to buy a plunged or fixed version. The plunged are a bit more expensive. You have to set how deep your cut is going to be before turning on the router if you are using a fixed router.

Then you eventually are going to need a band saw and a compound miter saw. You will need a lathe but it's the quality of your turning tools that will be important here. If you like to finish your projects quickly then purchase a biscuit joiner.

Finally, you are going to want a belt sander as well as a drill press.

Once you have purchased all of the wonderful tools there aren't going to be too many projects that you can't handle. You will now have a very well equipped workroom to give you many hours of enjoyment and quality workmanship.

About the Author:
Now that you have read this article, here is what to do next: Visit - http://www.MyShedPlans.com to download free woodworking plans and shed projects. Discover the easy way to build beautiful woodworking projects with over 12,000 shed plans and woodworking blueprints. MyShedPlans - Discover The Easiest Way To Build Remarkable Sheds And Woodworking Projects Today!

Article Source: http://www.articlesbase.com/sports-and-fitness-articles/choosing-the-right-woodworking-tools-and-equipment-for-your-workshop-1048680.html